Pipe Welder and Pipe Fitter
Local Candidates Only.
Pipe welders and pipe fitters are needed for a commercial and possibly industrial work
Pipe Welder Requirements:
-Must have at least 5 years experience.
-Current 6-G cert desired but not required.
if no current cert, must be able to pass schedule 40 carbon 6010/7018 X-Ray test
TIG welders will be tested on schedule 10 stainless with .038 rod hot pass
-Stick, TIG and some MIG experience necessary.
TIG welders preferred to have their own rig
-Must have PPE, shield, and gloves.
Pipe Fitter Requirements:
-At least 5 years of experience with cast, carbon, and chilled water pipe
-Interpreting blueprints, determining off-sets, isometrics, slope, and angles
-Able to run socket and butt-weld pipe, with familiarity operating a threader
General Requirements:
-Able to work outdoors in all weather conditions (hot, cold, rain, snow, and sleet)
-Able to lift and carry up to 75 pounds without assistance
-Able to perform work on uneven surfaces; frequently climb ladders, on/off equipment and work from various heights
-Able and willing to walk, stand, bend, and sit for long periods of time
-Able to use your hands to perform activities involving holding, grasping, turning and pulling
-Follow safety policies and procedures and wear the required personal protective equipment required for the job in a safe manner
LOCAL applicants only; No Per DiemEstimated Salary: $20 to $28 per hour based on qualifications.
Pipe welders and pipe fitters are needed for a commercial and possibly industrial work
Pipe Welder Requirements:
-Must have at least 5 years experience.
-Current 6-G cert desired but not required.
if no current cert, must be able to pass schedule 40 carbon 6010/7018 X-Ray test
TIG welders will be tested on schedule 10 stainless with .038 rod hot pass
-Stick, TIG and some MIG experience necessary.
TIG welders preferred to have their own rig
-Must have PPE, shield, and gloves.
Pipe Fitter Requirements:
-At least 5 years of experience with cast, carbon, and chilled water pipe
-Interpreting blueprints, determining off-sets, isometrics, slope, and angles
-Able to run socket and butt-weld pipe, with familiarity operating a threader
General Requirements:
-Able to work outdoors in all weather conditions (hot, cold, rain, snow, and sleet)
-Able to lift and carry up to 75 pounds without assistance
-Able to perform work on uneven surfaces; frequently climb ladders, on/off equipment and work from various heights
-Able and willing to walk, stand, bend, and sit for long periods of time
-Able to use your hands to perform activities involving holding, grasping, turning and pulling
-Follow safety policies and procedures and wear the required personal protective equipment required for the job in a safe manner
LOCAL applicants only; No Per DiemEstimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
